Bottom view
•
Ethernet—Connect wired devices to your wireless network with Ethernet (network)
cables. The green light turns on when an Ethernet device is connected and active on this
port. The light blinks when the extender is sending or receiving data over the Ethernet port.
How to Install the Range Extender
1. Plug in the range extender
Plug in the range extender midway between your router and the area without Wi-Fi. Using
your mobile device or laptop, be sure you have at least two bars (around 50%) of your
router’s Wi-Fi signal at that location. The setup software will help you find the right place
if you have trouble.
22
To Next Page
Loading...
