You will be prompted to enter a user name and password. If you did not change them
during setup, leave the user name blank and enter “admin” in the password field. If you
customized the SSID and password, enter those credentials.
If you are connected to your local network, but not to the range extender, you will need
to enter the range extender’s IP address in your browser to access the extender’s
settings. Find the IP address on your router’s administrative interface.
Using Range Extender Settings
Click
Help
on the right side of the screen for additional information on the screen’s options.
Changes to settings will not be effective until you click Save at the bottom of the
screen. You also can click Cancel to clear any changes.
24
To Next Page
Loading...
