Linksys RE7310 User Manual

11
Accessing Your Range Extender Settings
To change or view range extender settings, first connect to an extended network, e.g.,
MyWiFi_Ext. In a browser, go to http://extender.linksys.com
and enter the range extender’s admin
password.
Your range extender's default admin password is "admin". It is highly recommended that you
change this after setup.
To change your admin password, click the
Management tab and enter a new password under
Extender Access .
If you have not changed the range extender’s default name, you can also access settings when
connected to your main router.
Visit http://RE7310-XXX (Windows) or http://RE7310-XXX.local
or (Mac OS X or iOS) in a
browser.
Note—XXX are the last 3 digits of your range extender’s MAC address. You can find the MAC
address on the back of your RE7310. (You might have to unplug your range extender to see the
MAC address label. Plug it back in and make sure the light is solid blue before visiting the URL.)

Linksys RE7310 Specifications

General

Brand	Linksys
Model	RE7310
Category	Extender
Language	English