EasyManuals Logo

Linksys WIRELESS-G WRT54GS User Manual

Linksys WIRELESS-G WRT54GS
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
13
Chapter 5: Configuring the Wireless-G Broadband Router
Overview
Wireless-G Broadband Router with SpeedBooster
Chapter 5: Configuring the Wireless-G Broadband
Router
Overview
You should always use the Setup CD-ROM when first installing the Router. If you do not wish to run the Setup
Wizard on the Setup CD-ROM, you can use the Web-based Utility to configure the Router. For advanced users, you
may configure the Router’s advanced settings through the Web-based Utility.
This chapter will describe each web page in the Utility and each page’s key functions. The utility can be accessed
via your web browser through use of a computer connected to the Router. For a basic network setup, most users
will use these two screens of the Utility:
Basic Setup. On the Basic Setup screen, enter the settings provided by your ISP.
Management. Click the Administration tab and then the Management tab. The Router’s default password is
admin. To secure the Router, change the Password from its default.
There are seven main tabs: Setup, Wireless, Security, Access Restrictions, Applications & Gaming, Administration,
and Status. Additional tabs will be available after you click one of the main tabs.
To access the Web-based Utility, launch Internet Explorer or Netscape Navigator, and enter the Routers default IP
address, 192.168.1.1, in the Address field. Then, press Enter.
A password request page will appear. (Non-Windows XP users will see a similar screen.) Leave the User Name
field blank. The first time you open the Web-based Utility, use the default password admin. (You can set a new
password from the Administration tab’s Management screen.) Click the OK button to continue.
HAVE YOU: Enabled TCP/IP on your PCs? PCs
communicate over the network with this protocol.
Refer to “Appendix D: Windows Help” for more
information on TCP/IP.
NOTE: When first installing the Router, you should
use the Setup Wizard on the Setup CD-ROM. If you
want to configure advanced settings, use this
chapter to learn about the Web-based Utility.
Figure 5-1: Password Screen

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Linksys WIRELESS-G WRT54GS and is the answer not in the manual?

Linksys WIRELESS-G WRT54GS Specifications

General IconGeneral
Wireless Standard802.11g
Frequency Band2.4 GHz
Ethernet Ports4x 10/100 Mbps LAN, 1x 10/100 Mbps WAN
Security FeaturesWEP, WPA, WPA2, SPI Firewall
Data Transfer Rate54 Mbps
ButtonsReset, SecureEasySetup
Operating Temperature32 to 104°F (0 to 40°C)
Storage Temperature-4 to 158°F (-20 to 70°C)
Operating Humidity10% to 85% Non-condensing
Storage Humidity5% to 90% Non-condensing
Antenna2 x External
LEDsPower, DMZ, WLAN, LAN (1-4)
Power12V DC

Related product manuals