13
Chapter 5: Setting Up the Wireless-G Range Expander
Running the Setup Wizard
Wireless-G Range Expander
7. Now that the Setup Wizard has found an access point or wireless router with which to communicate, it will
now search for the Range Expander. Select the one you want. Then, click Yes to continue, or click No to return
to the Welcome screen of the Setup Wizard.
8. You will be asked to enter its password. Enter the default password, admin. (Some wireless networks may
require additional security settings at this time.)
Then, click Enter to continue. To exit this Setup Wizard, click
Exit.
Figure 5-9: Choose the Range Expander
Figure 5-10: Enter the Password
To Next Page
Loading...
