Linksys WRE54G

Wireless-G Range Expander
List of Figures
Figure 3-1: Front Panel 6
Figure 3-1: Front Panel with Ethernet Network Cable Connected 6
Figure 3-2: Recess for the Power Plate 7
Figure 4-1: Connecting the Ethernet Network Cable 8
Figure 4-2: Using the Power Plate with Cord 8
Figure 4-3: Using the Power Plate with Plug 8
Figure 4-4: Using the Power Plate with Cord 9
Figure 4-5: Using the Power Plate with Plug 9
Figure 5-1: Setup Wizard’s Welcome Screen 10
Figure 5-2: Check Your Wireless Network 10
Figure 5-3: Confirm Wireless Network Settings 11
Figure 5-4: Wireless Network Not Found 11
Figure 5-5: Choose the Access Point 11
Figure 5-6: Configure Wireless Settings Manually 11
Figure 5-7: WEP Security Settings 12
Figure 5-8: WPA Security Settings 12
Figure 5-9: Choose the Range Expander 13
Figure 5-10: Enter the Password 13
Figure 5-11: Configure Network Address Settings 14
Figure 5-12: MAC Address of Access Point or Wireless Router (WRE54G v1 Only) 14
Figure 5-13: Confirmation Screen 15
Figure 5-14: Congratulations Screen 15
Figure 5-15: Using the Power Plate with Cord 16
Figure 5-16: Using the Power Plate with Plug 16
Figure 6-1: Login Screen 17
Figure 6-2: Setup Tab - Basic Setup 18
Figure 6-3: WPA Security 19
Figure 6-4: WEP Security 19