Product Overview
Top view
Ethernet------If the LED is continuously lit, the modem router is successfully connected to a
device through that port.
Wi-Fi Protected Setup™------The LED is continuously lit when a Wi-Fi Protected Setup™
connection is successfully established. The LED blinks slowly while Wi-Fi Protected
Setup™ is setting up a connection, and blinks rapidly if an error occurs. The LED is off when
Wi-Fi Protected Setup™ is idle.
Wi-Fi------Lights up when the wireless feature is enabled. It flashes when the modem router
is actively sending or receiving data over the network.
DSL------Lights up green when the modem router is connected directly to a DSL line. Lights
up blue when the modem router is set up as a router only and is connected to the internet
through a separate modem.
Internet------ Lights up green when the modem router has an Internet connection. Flashes
green while the modem router is establishing the Internet connection. Lights up red when
the modem router cannot obtain an IP address.
Power------Lights up green when the modem router is powered on. When the modem router
goes through its self-diagnostic mode during every boot-up, the LED flashes. When the
diagnostic is complete, the LED is continuously lit. Lights up red when an error occurs.
3
To Next Page
Loading...
