Advanced Configuration
If you would like to change the router’s advanced settings, use the router’s browser-based
utility. You can access the utility via a web browser on a computer connected to the
router. For more help with the utility, click Help on the right side of the screen or go to our
website.
How to access the browser-based utility
1.
To access the browser-based utility, launch the web browser on your computer,
and enter the router’s default Internet Protocol (IP) address, 192.168.1.1, in the
Address field. Then press Enter.
Note—You can also access the browser-based utility on Windows computers by
entering the device name in the Address field.
A login screen appears
.
2.
In the User name field, enter admin.
3.
In the Password field, enter the password created during setup. If you did not
change the password in setup, the default is ‘‘admin’’.
4.
Click OK to continue.
13
To Next Page
Loading...
