SYSTEM AND SUPPORT | 27
Setting the Clock Manually
• Navigate through > Settings > General >
System Manager > Time > Clock > Clock Mode >
Manual.
• When Clock Mode is set to Manual, you can
directly enter the current date and time. Use the
/ / / buttons on the remote to select the
Date and Time.
Using the Sleep Timer
• Navigate through > Settings > General >
System Manager > Time > Sleep Timer
• Use this function to automatically turn the TV to
standby after a pre-set period of time. You can
set the sleep timer for up to 180 minutes.
Turning off the TV using the Off Timer
• Navigate through > Settings > General >
System Manager > Time > Off Timer
• Set this function to turn the TV to standby at
a specific time. This function is only available
once the Clock settings has been done.
Using the Power and Energy Saving
Functions
• Navigate through > Settings > General
> Power and Energy Saving to reduce energy
consumption. You can adjust the below:
• Screen Saver : activate a screensaver when
your TV displays a still image for two hours or
more.
• Auto Power Off : automatically turns off the TV
to reduce unnecessary power consumption if
the TV button and remote control are not used
for a set period of time.
To Next Page
Loading...
