26 | TV SYSTEM AND SUPPORT
You can configure system and support settings
including clock, timers, energy usage and software
updates.
System and Support
Using the Time Functions and the Timers
• Navigate through > Settings > General >
System Manager > Time to set the clock manually
or automatically. Once the Clock is set, you can
view the current time on the TV anytime. You must
set the Clock in the below instances:
Setting the Clock Automatically
• Navigate through > Settings > General >
System Manager > Time > Clock > Clock Mode >
Auto.
Adjusting the Clock for DST and Time Zone
• Navigate through > Settings > General >
System Manager > Time > Clock > Time Zone to
set the correct time (local time zone) or Daylight
Savings Time (DST).
• Note: this function is only available when Clock
Mode is set to Auto.
Changing the Current Time
• Navigate through > Settings > General >
System Manager > Time > Clock > Time Offset to
adjust the time through a network connection.
• Note: this function is only available when Clock
Mode is set to Auto, and if the TV doesn't receive
time data through regular broadcast signals. You
must also be connected to internet.
• Power cable is disconnected then connected.
• Clock Mode is changed from Auto to Manual
• TV is not connected to the Internet
• No broadcast signals are received.
You must be connected to the internet or digital broadcasts
are received through a connected antenna. The accuracy of
the time may differ with the channel and signal.
To Next Page
Loading...
