Page 7 of 12 FA69351–2 English
Jun 2013
12
How To Create a Remote Field
Linx 5900 & 7900
2.3.2 Maximum Number of Characters
Use this option to set the maximum number of characters that the remote computer can
download into this field. The printer uses this value to calculate the space that is needed in
the message.
2.3.3 Auto Reload
If this option is set to to Yes, when you power down the printer any data entered in the
remote field is saved. The data in the field is loaded again when you power up the printer. If
this option is set to No, data entered in the remote field is not saved when you power down
the printer.
2.3.4 Options
Select this option to display the Options page for the remote field.
Figure 7. Options page
This page is like the Options page for other field types. The Options page is described in
the Linx 5900 & 7900 Quick Start Guide.
69032
To Next Page
Loading...
