Page 10 of 32 FA69381–2 English
Jun 2013
32
How To Use a Different Keyboard
Linx 5900 & 7900
You can use the [alt] + [x] keyboard shortcut from most text entry edit boxes to open the
character selector.
Figure 16. Text page: character selector
NOTE: Any text that you entered at the previous text entry edit box appears in the text box
of the character selector.
Any characters that you now select in the character selector are displayed in the text
box.
To use the character selector to select characters:
1 To move the cursor to the required character, hold down the [alt] key and the Up,
Down, Left, or Right arrow key.
2 To select the character, press the [enter] key. The selected character is displayed in
the text box at the current position of the cursor. You can continue to use the
standard keyboard to enter characters in the text box.
Figure 17. Text page: character selector with text
69502
To Next Page
Loading...
