Linx 7900 - Page 483

Page 23 of 24 FA69354–2 English
Jun 2013
24
How To Create Bar Codes
Linx 7900
Select the required date format (for example dd/mm/yy) and press the OK
key. The Data Matrix (GS1-128): Expiry Date page is displayed.
Figure 35. Data Matrix (GS1-128): Expiry Date page
The Expiry Date page options are as follows:
• Day of Month—enter the day (in the range 01 to 31). You can only
enter a valid number for the day of month.
• Month—enter the month (in the range 01 to 12). You can only enter a
valid number for the month.
• Year—enter the year (in the range 00 to 99). You can only enter a valid
number for the year.
• Display Months As Text—if set to Yes, the selected month is displayed
as text (for example 21/09/07 becomes 21/SEP/07, as shown in
Figure 36). The option defaults to No.
Figure 36. Data Matrix (GS1-128): Expiry Date page with month displayed as text
• Format—shows the date in the selected format. If you select this
option, the Data Matrix (GS1-128): Format page is displayed.
NOTE: Some of the above options are not available for all expiry date formats.
69029
69046