Page 34 of 38 FA69356–2 English
Jun 2013
38
How To Create Date and Time
Formats
Linx 5900 & 7900
4.3 Insert a Round element
The following example shows how you use a Round element in a Date and Time format.
The command parameter is “BAKDOW,1”. This parameter makes sure that the printed date
is always a Monday, like the example on page 31.
1 Create a new, blank Date and Time format—select Menu > Stores > Date & Time
Store > New > Insert Element. (See steps 1 to 3 of the example on page 6.)
2 At the Insert Element page, use the Down arrow key to highlight the ‘(Round)’
element.
Figure 39. Insert Element: Round
3 Press the OK key to return to the Date & Time Editor page.
Figure 40. Round element with no parameter
69367
69368
To Next Page
Loading...
