Rev: 07.15.19 Page 1 CCD-0002704
HAPPIJAC
®
BED LIFT SUPPORT LEG AND BRACKET INSTALLATION
TI-322
POWER AND MOTION
Purpose
The purpose of this document is to provide instructions on:
• the installation of support legs (Fig. 1) on the sofa unit attached to the HappiJac Bedlift.
• the removal and installation of the HappiJac Bedlift support brackets (Fig. 2).
Fig. 1
A
Resources Required
• Cordless or electric drill or screw gun
• Appropriate drive bit
• Non-permanent marking method
• Sharp cutting instrument
• 1
¼
" self-tapping screws
Fig. 2
A
To Next Page
