EasyManua.ls Logo

Lippert Solera 3000 Series - Maintenance; Fabric Care; Notes

Lippert Solera 3000 Series
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
CCD-0001262
3000 Series 12V
Power Awning
LED Lights
Aftermarket Manual
(For Aftermarket Applications)
lippert.com 432-LIPPERT (432-547-7378) Rev. 09.23.24
NotesMaintenance
Fabric Care
If the awning is retracted while wet, extend the awning and
let it dry as soon as conditions allow before retracting. This
will help prevent the formation of mildew and add greatly to
the life of the awning.
NOTE: Mildew does not form on the fabric itself, but on the
accumulated dust, dirt and grime.
1. Periodically clean vinyl or woven acrylic fabric using a
mixture of ¼ cup of dish soap and 5 gallons of warm water
2. Liberally apply the mixture on the top of the fabric and
retract the awning for 5 minutes. This will apply the mixture
to the bottom of the fabric as well.
3. 󰀨
if necessary.
4. Allow to dry before retracting.

Related product manuals