Listen SQ
TM
- Improving Your Listening Experience
SQ - A Listen Exclusive
What is SQ?
We are accustomed to listening to low noise, high fidelity audio (delivered via CD, DVD, etc.). FM radio systems, such as
those made by Listen, are inherently noisy compared to most sound systems. To reduce noise of our systems, Listen now
offers a noise reduction technology called ListenSQ
TM
. Both the transmitter and receiver must have SQ on to achieve the
desired results. SQ is now available on new Listen systems, including the system you received in this shipment. If you are
planning to use this product with older Listen systems or equipment not manufactured by Listen, you should disable SQ.
SQ Summary
• Improves noise performance by at least 20dB
• SQ is NOT compatible with older version Listen products
• SQ is NOT compatible with other manufacturers’ products
• To work properly, SQ must be enabled for both the transmitter and
receivers
• SQ can be disabled to permit operation with older Listen products
or other manufacturers’ products
Your Listen equipment has been shipped to you with the SQ feature enabled. You may need to disable the SQ
function for one or more of the following reasons:
1. You are using your new Listen system with older version Listen equipment that does not have the SQ function.
2. You are using your new Listen system with equipment supplied by other manufacturers.
3. You expect that end users may bring and use their own receivers that don’t have the SQ function.
For information on enabling / disabling the SQ function for specific products, refer to the following pages:
LT-800: Page 8
LT-700: Page 14
LR-300: Page 23
LR-400: Page 23
LR-500: Page 23
LR-100: Page 31
To Next Page
Loading...
