Page 28 Chapter 5: Safe handling of lithium batteries Guide
5.3. Precautions before installation
Before installation, be sure to read the contents in Chapter 1 Safety Precautions, which is related
to the operation Safety of installation personnel, please pay attention to.
5.4. Tools
The following tools are required to install the battery pack:
Wire cutter Cable clamp Screwdriver
NOTE:
●Use properly insulated tools to prevent accidental electric shock or short circuits. If insulated tools are not
available, cover the entire exposed metal surfaces of the available tools, except their tips, with electrical tape.
5.5. Safety Gear
It is recommended to wear the following safety gear when dealing with the battery pack:
Insulated gloves Safety goggles Safety shoes
To Next Page
Loading...