Page 21 Chapter3: How to use Monitoring Software EMS Tools
3. How to use the Monitoring Software Ems Tools
3.1. Monitoring Software Ems Tools connection
1) ConnecttheRS232interfaceofthebatterytothecomputerusingtheRS232communicationli
ne (this accessory is an optional accessory, need to be purchased separately from the
manufacturer).
2) Unzip the package file of the Monitoring Software Ems Tools in the same file
directory.
Pay attention to the directory - do not store other files.
Figure3.1.1. Unzip of Monitoring Software Ems Tools
3) Open the Monitoring Software Ems tools icon, enter the protocol selection interface,
select the EMS Low Voltage Protocol version, and enter the password (please contact the
manufacturer for the password) to log in the software.
Figure3.1.2.Protocol selection interface Figure3.1.3.Enter the password
4) Users can set different languages according to their own needs. We support four
languages, which are Simplified Chinese, English, Japanese and Spanish.
Figure3.1.4.Monitoring Software Ems language selection
To Next Page
Loading...