LMI Technologies Gocator 2180 User Manual

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 428
Element Type Description
TiltXAngle 64f Setting for custom tilt correction angle X.
TiltYAngle 64f Setting for custom tilt correction angle Y.
Measurements\BaseX Stud tool
measurement
BaseX measurement.
Measurements\BaseY Stud tool
measurement
BaseY measurement.
Measurements\BaseZ Stud tool
measurement
BaseZ measurement.
Measurements\TipX Stud tool
measurement
TipX measurement.
Measurements\TipY Stud tool
measurement
TipY measurement.
Measurements\TipZ Stud tool
measurement
TipZ measurement.
Measurements\Radius Stud tool
measurement
Radius measurement.
Features\TipPoint GeometricFeature TipPoint PointFeature
Features\BasePoint GeometricFeature BasePoint PointFeature
Element Type Description
id (attribute) 32s Measurement ID. Optional (measurement disabled if not
set).
Name String Measurement name.
Enabled Boolean
Measurement enable state:
0 – Disable
1 – Enable
HoldEnabled Boolean
Output hold enable state:
0 – Disable
1 – Enable
SmoothingEnabled Boolean
Smoothing enable state:
0 – Disable
1 – Enable
PreserveInvalidsEnabled Boolean Preserve invalid measurements enable state
0 – Disable
1 – Enable
SmoothingWindow 32u Smoothing window.
Scale 64f Output scaling factor.
Offset 64f Output offset factor.
Stud Tool Measurement

LMI Technologies Gocator 2180 Specifications

General

Brand	LMI Technologies
Model	Gocator 2180
Category	Accessories
Language	English