LNC MW5800 Series User Manual

40
LNC woodworking Machine Series Operation Manual
寶元數控 LNC Technology Co., Ltd.
5. Parameters Setting
User Parameters 5.1.
 Function Path: Maintenance Group > User Parameters (it's required to switch the system
level to 5)
Note：The contents of the user parameters will vary depending on the model version, but not
all models of the woodworking machine are the same.
User parameters are divided into 6 items, respectively, as follows:
- Project parameters: The parameters in this area include loading and unloading parameters,
tool magazine-related parameters, etc.
- System switch: switch setting of related functions in the system, for example: whether it's
priority to return to the origin after power on, whether the Z axis is preferentially returned to
the origin, whether to use air pressure detection, etc.
- System value: The setting of the relevant function value in the system, for example: the

LNC MW5800 Series Specifications

General

Brand	LNC
Model	MW5800 Series
Category	Controller
Language	English