Loadrite Sprint - Viewing Long Total; Clearing Totals

5-20
LOADRITE Sprint User manual
5.6. DISPLAY
This option allows the display to be configured. The following menu items are available:
5.6.1. Changing the screen brightness
To change the brightness of the display screen, complete the following:
1) From the Display Menu select Light, then press .
2) Press
or to adjust the backlight brightness up or down.
3) Press
to save the brightness level.
5.6.2. Changing the screen contrast
To change the contrast of the display screen, complete the following:
1) From the Display Menu select Contrast, then press
.
2) Press
or to adjust the backlight contrast up or down.
3) Press
to save the contrast level.
5.7. LONG TOTAL
View and clear the long total for current products.
 For more information, (see "View and clear the long total" on page 3-15).
5.8. SELF TEST
This function tests various functions and the internal memory. All tests are run automatically when this option is selected. When
the test has completed, the Ready screen will display.
5.9. UPLINK
This option is used to upload a configuration file created using LOADRITE Toolbox via a LOADRITE Data Module or from a PC
via a EDP cable. The configuration file contains product names, data lists and settings.
 For information on creating a configuration file, refer to the LOADRITE Toolbox User Manual.
5.9.1. Uploading a configuration file via a EDP cable
1) From the Uplink Menu select EDP, then press .
The Indicator will enter Uplink mode.
2) When the message Uplink Ready is displayed, use LOADRITE Toolbox to send the configuration file.
 The message Updating and a counter will display as the Indicator receives the configuration file.
 LOADRITE Toolbox will display a message to indicate that the upload is complete.
3) Press
to exit Uplink mode.