8-28
LOADRITE Sprint User manual
8.19. TOO HEAVY, ZERO ABORTED
If the weight of product in the bucket is greater than 10% of full bucket capacity when is pressed, the screen displays this
message and does not alter any settings. This prevents any accidental zeroing of valid weights.
NOTE: If the bucket is empty and the message still occurs, there may be a fault in the system. The LOADRITE Weighing
System should be checked and, if necessary, re-calibrated.
8.20. WARM-UP LIFT
This message displays if the LOADRITE Indicator has been turned off for more than one hour, prompting a warm-up lift.
To Next Page
Loading...
