5-21
LOADRITE Sprint User manual
5.9.2. Uploading a configuration file via a LOADRITE Data Module
1) From the Uplink Menu select Data Module, then press .
2) Connect the LOADRITE Data Module containing the configuration file to the Indicator.
3) When the Sync Config From Module? message displays, press .
A counter will display as the Indicator receives the configuration file.
4) When the Delete Config From Module? message displays, press .
The configuration file will be deleted from the Data Module.
5.10. STANDBY
This option puts the Indicator into Standby mode. The Indicator will also go into Standby mode if it is not used for two hours.
Press any button to exit Standby mode.
To Next Page
Loading...
