DYNAMIC MOTION SYSTEM - SYSTEM MANUAL // PAGE 12
4.1.2 TYPES OF POWER HUB
This manual contains variants of DYNAMIC MOTION Power Hubs. The conguration of the Table System
depends on the Power Hub that is used. The two types of Power Hubs are as follows:
DMP240
• 4 Output Ports
• Maximum 240 W Power Output
• Versions for EU/US Mains Voltages
DMP360
• 5 Output Ports
• Maximum 360 W Power Output
• Versions for EU/US Mains Voltages
4.1.3 CONNECTING CABLES
CAUTION
Risk of minor or moderate injury through burns or electric shocks
Connecting Cables to the Power Hub incorrectly may lead to minor or moderate injury
through burns (due to overheating), or electric shocks.
• Do not force or bend Connectors
• Ensure Connectors are oriented correctly (see diagram)
• Do not insert ngers or objects into the Connectors or housing of the Power Hub
Fig. 2: Inserting connectors
Locking Tab facing upwards.
Markings on the top surface
To Next Page
Loading...
Need help?
General
