DYNAMIC MOTION SYSTEM - SYSTEM MANUAL // PAGE 3
CONTENTS
1 General information 5
1.1 Other applicable documents 5
1.2 Copyright 5
1.3 Royalty-free use of images and text 5
1.4 Trademarks 5
2 Safety 6
2.1 Target audience 6
2.2 General safety regulations and obligations 6
2.3 Intended use 6
2.4 Reasonably foreseeable misuse 6
2.5 Explanation of symbols and signal words 7
2.6 Liability 7
2.7 Residual risks 8
2.8 Skilled Persons 9
2.9 Notes for Resellers 9
3 Scope of delivery 9
4 Assembly 10
4.1 Requirements for Assembly 11
4.1.1 Types of Table System 11
4.1.2 Types of Power Hub 12
4.1.3 Connecting Cables 12
4.2 Table system with 1 Power Hub 13
4.2.1 Required components 13
4.2.2 Connecting the components 13
4.2.3 Completing Assembly 13
4.3 Benching Table System 14
4.3.1 Required components 14
4.3.2 Connecting the components 14
4.3.3 Completing Assembly 15
4.4 Table system with multiple Power Hubs 16
4.4.1 Required components 16
4.4.2 Connecting the components 16
4.4.3 Completing Assembly 17
4.5 Connecting Power Hubs 18
4.6 Connecting External Power Supplies 18
4.7 Performing a Position Reset Procedure 18
To Next Page
Loading...
