LOGICDATA DYNAMIC MOTION User Manual

DYNAMIC MOTION SYSTEM - SYSTEM MANUAL // PAGE 4
5 Operation 19
5.1 Notes for EASY2move 19
5.2 Standard functions 20
5.2.1 Adjusting the table top height 20
5.3 Advanced functions 20
5.3.1 Saving Memory Positions 20
5.3.2 Adjusting the table top to a saved position 21
6 Software dependent functions 22
6.1 Standard functions 22
6.1.1 Low speed area 22
6.1.2 Safety area 22
6.1.3 Container Stop and Self Stop Positions 22
6.1.4 Factory Reset 23
6.2 Advanced functions 23
6.2.1 Key Lock 23
6.2.2 Correcting the height display 24
6.2.3 Changing the displayed Unit of Measurement 24
7 Changing the table system 25
7.1 Replacing an Actuator 25
7.1.1 Unplugging the Cable from the Actuator 25
7.2 Replacing a User Interface 26
7.3 Replacing a Power Hub 26
8 Collision Protection 26
8.1 Intelligent System Protection 26
8.2 Drive Back Function 26
9 Troubleshooting 27
9.1 Possible Problems and their solutions 27
9.2 System Information 28
9.2.1 DMUI-TOUCH-B-UD/DMUI-EASY2move 28
9.2.2 DMUI-TOUCH-C-FX 29
10 Additional Information 31
10.1 Disassembly 31
10.2 Maintenance 31
10.2.1 Cleaning 31
10.3 Disposal 31

LOGICDATA DYNAMIC MOTION Specifications

General

Brand	LOGICDATA
Model	DYNAMIC MOTION
Category	Indoor Furnishing
Language	English