User Manual
LogicS-2 / LogicS-3
Page 7/33
1.7. Package Contents
The LogicS control box package contains:
Fig. 1 - Package Contents
c
LogicS control box with mounting link
d
Mounting plate
e
Mains cable
Note: For detailed information on optional control components and
accessories, see page 30!
1.8. Unpacking
The LogicS motor control comes packaged in a cardboard box. Some
components are additionally heat-sealed in plastic foil. To unpack proceed as
follows:
1. Remove the cardboard and plastic foil from the control components.
2. Check the scope of supply.
3. Dispose of the packaging materials.
4. Keep the user manual at hand for the operating personnel.
Note: Dispose of the packaging material ecologically sound (separate
plastic foil and cardboard)!
To Next Page
Loading...
Need help?
General
