LOGICDATA LogicS-3 - User Manual

User Manual
Motor Control for Height Adjustable Desks
LogicS-2 / LogicS-3
LOGICDATA Electronic & Software Entwicklungs GmbH
Hinterleitenstrasse 22a
A 8523 Frauental /Austria
Version: 3
Availability and specifications are subject to change without prior notice. LOGICDATA assumes no
liability for maloperation or improper use of products. LOGICDATA will at point of delivery
replace/repair defective products covered by the warranty. No liability is assumed beyond such
replacement/repair. Please contact LOGICDATA directly on inquiries or custom requirements.
2004 LOGICDATA

LOGICDATA LogicS-3 Specifications

General

Brand	LOGICDATA
Model	LogicS-3
Category	Control Systems
Language	English

Summary

Introduction and Overview

Intended Use and Operation

Safety Warning Symbols Explained

Explains the meaning of warning symbols used throughout the manual for safety.

Intelligent System Protection (ISP)

Details the Intelligent System Protection feature and its benefits for user safety.

General Safety Guidelines

Covers essential general safety guidelines for operating the LogicS control box.

Critical Service and Repair Information

Provides critical information regarding repairs and the use of genuine replacement parts.

Mounting the LogicS Control Box

Initial Setup and Operation

LogicS Control Box Interfaces

Initial Operation Procedure

Operating the LogicS Control Box Features

Basic Desk Movement Controls

Advanced Desk Position Features

Software-Controlled Functions

Troubleshooting and Support

Troubleshooting Common Issues

Provides a guide to common issues and their resolutions for the LogicS control box.

Understanding Error Messages

Lists error codes displayed by the control box and their corresponding causes and solutions.