LOGICDATA LogicS-3 User Manual

User Manual
LogicS-2 / LogicS-3
Page 25/33
4.3.9. Auto Detect Number of Drives
In the course of the reset procedure, the number of drives is being checked.
The control box automatically reconfigures itself to the number of detected
drives.
4.3.10. Duty Cycle Monitoring
The duty cycle monitoring function forces the control box to stop after a
certain on-time is exceeded (e.g. after 1 min. of continuous operation driving is
disabled for the succeeding 9 min.).

LOGICDATA LogicS-3 Specifications

General

Brand	LOGICDATA
Model	LogicS-3
Category	Control Systems
Language	English