4
2. General LogiCO2 Safety System description
LogiCO2´s O2 Safety Systems measure O2 concentration in a confined space environment and
provides alerts/alarms in the event that O2 levels in that space reaches a preset level. The O2 sensing
devices uses an optical sensor for accurate detecting of O2. When installed properly, the system will
continuously monitor the O2 concentration where a O2 sensor is located.
If a sensor detects a low or high O2 level, the O2 sensor alerts via sound and light and remotely
connected warning lamps, horns or horn/strobes will be activated. The central unit will alert with
sound and display which sensor that has detected a low or high O2 level. A properly installed system
will begin to detect O2 levels when powered on, after a self-diagnostics program has been made by
the system. No additional start-up procedure or adjustment is necessary.
The system is delivered as pre-connected sets with auxiliary kits to extend the function of the sets.
The sets are comprised of one or more O2 sensors, with auxiliary central unit/s, horn/s and relay
boxes.
Examples of sets and kits:
O2 Sensors
Sound/Light/Relay
connected to sensors
Control/Visualize
Central Unit
Mk9 O2 set
2056
Mk9 O2 sensor kit
2124
To Next Page
Loading...
