21
GB
Using the Features
Customising the Picture Setting
Picture Mode
Allows you to set your preferred picture mode.
1. Press the MENU button and then use the
buttons to select the Picture
menu and then press the OK button or the
button.
2. Press the
buttons to navigate the menu and change the settings.
Picture Mode Cycles among display types: Standard / Personal /
Movie / Sport / Mild / Game.
Alternative
Press the P.MODE button to select the Picture
mode directly.
Brightness Increase or decrease the amount of white in the
picture. (for Personal mode)
Contrast Adjusts the difference between light and dark levels
in the picture. (for Personal mode)
Sharpness Adjusts the level of crispness in the edges between
light and dark areas of the picture.
Colour Controls the colour intensity. (for Personal mode)
Tint (For NTSC
format)
Adjusts the balance between red and green levels.
(Tint is only available for NTSC signal reception.)
Colour Temperature Adjusts the colour components independently to
achieve a warm or cool.
• Standard: Remains natural tint unchange
• Warm: Increases red tint
• Cool: Increases blue tint
Noise Reduction • Select to reduce the noise level of the received TV
signal: Off / Low / Middle / High. (TV mode)
3. Press the MENU button to save the settings and return back to the previous
menu or the EXIT button to exit the menu.
L37DIGB10_IB_L37DIGB10_IB_110131_Annie.indd 21 11年1月31日 上午10:54
To Next Page
Loading...
