18
Wash Setting
Standard Washing
1. Open the machine door and drum lid, and put the laundry into the drum. Make sure no
washing gets caught between the drum and machine door.
2. Close the drum lid.
3. Add detergent into the detergent drawer. The quantity of detergent will depend on the
amount of laundry, the degree of soiling and the water hardness. Use the amount of
detergent suggested on the packaging.
4. Close the machine door. Turn the Programme Selection Dial to select your wash programme.
5. Select the spin speed and other functions if desired.
6. Press the Start / Pause button to start the washing.
7. The washing machine will sound when the programme is complete.
Before First Use
Before washing your clothes for the rst time, run a full wash programme rst:
1. Connect the machine to the mains power supply and the water supply.
2. Put a small amount of detergent in the detergent drawer. Close the door.
3. Select a wash programme.
4. Press the Start / Pause button.
Removing Washing (Once programme is nished)
Door remains locked for 1 minute after wash stopped.
• Open the washing machine door and drum to remove your washing.
• Remove any foreign objects to avoid risk of rusting.
• Leave the door and drum open so that residual water can evaporate.
L610TL22E_IB_5L_RC_Final240326.indb 18L610TL22E_IB_5L_RC_Final240326.indb 18 26/3/2024 3:49 PM26/3/2024 3:49 PM
To Next Page
Loading...
