EasyManuals Logo

Logik L75DAB20 User Manual

Logik L75DAB20
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
12
Setting the Alarm
Make sure you have preset FM and DAB stations before setting the Alarm.
1. The unit has two alarms. Press the ALARM button to set alarm 1 or alarm 2. The display
will show “Alarm # Setup”.
2. Press the ENTER button, then turn the SCROLL
/ dial to adjust the hour digits.
Press the ENTER button to conrm.
3. The minute digits will ash. Turn the SCROLL
/ dial to adjust the minute digits and
then press the ENTER button to conrm.
4. Turn the SCROLL
/ dial to select the alarm duration (15/30/45/60/90/120
minutes). Press the ENTER button to conrm.
5. Turn the SCROLL
/ dial to select the type of alarm (FM/Buzzer/DAB). Press the
ENTER button to conrm.
6. If you have chosen FM or DAB, turn the SCROLL
/ dial to select a Preset radio
station or the Last listened station. Press the ENTER button to conrm.
7. Turn the SCROLL
/ dial to select the day(s) the alarm is set for (Daily/Once/
Weekends/Weekdays). Press the ENTER button to conrm.
8. Turn the SCROLL
/ dial to select the alarm wake up volume level. Press the ENTER
button to conrm.
9. Turn the SCROLL
/ dial to select alarm On or O. Press the ENTER button to
conrm.
10. After nish the settings, the display will show Alarm Saved. The alarm icon and number
will appear on the display when the unit is in standby mode.
Activating/Deactivating the Alarm Function
1. When the unit is in standby mode, press the ALARM button, and then turn the SCROLL
/ dial to select On or O for Alarm 1 and Alarm 2.
OR
Press the ALARM button repeated to select On or O for Alarm 1 and Alarm 2.
2. Press the ENTER button to conrm, and the display will Alarm saved.
If you have activated the alarm function and the wake-up mode is DAB or FM,
make sure that the volume is at a sucient level for you to hear.
Snooze Function
When the alarm has been triggered, press the SNOOZE button to temporarily switch o the
alarm. Press the SNOOZE button to select a time 5/10/15/30 minutes. The display will show
a Snooze countdown and the alarm will be triggered again when the countdown reaches 0.
Set Alarm Duration Snooze time
15 minutes 5 / 10 minutes
30 minutes 5 / 10 / 15 minutes
45 / 60 / 90 minutes 5 / 10 / 15 / 30 minutes
If one alarm goes o while the other is in snooze mode, snooze mode will be
cancelled.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Logik L75DAB20 and is the answer not in the manual?

Logik L75DAB20 Specifications

General IconGeneral
BrandLogik
ModelL75DAB20
CategoryRadio
LanguageEnglish

Related product manuals