11
Residual Heat Indicator
The heating zones will still be hot once switched off.
A warning symbol will appear on the display to indicate
that it is still hot:
‘H‘ on the display indicates that the temperature
of the heating zone is above 60°C
‘h’ indicates that the heating zone temperature
is between 45°C and 60°C
These symbols will disappear once the temperature
drops below 45°C.
If you have a power cut there will be no residual heat warning symbols showing
on the display, but the heating zones may still be very hot.
Setting the child lock
Setting the child lock will stop any of the controls from
working so a child can’t operate the hob or if you leave
anything on the controls it won’t switch on.
1. Touch the
control to switch the hob on.
2. Touch and hold the
control for 3 seconds. The
hob will beep and the lock indicator light will flash
on and off.
3. None of the controls will now work.
The child lock can also be activated while a cooking zone is in use. If the child lock is set the hob
can only be switched off, when switched back on all of the controls will be locked.
Switching o the child lock
1. Touch the control to switch the hob on.
2. Touch and hold the
control for 3 seconds. The hob will beep and the lock indicator light will flash on
and off. You will now be able to use all the controls again.
* All images are for indication only; please refer to your individual unit for actual item.
To Next Page
Loading...
Need help?
General
