Logitech Harmony Smart Control

Logitech Harmony Smart Control
34
To add steps to an Activity in your MyHarmony account:
1. Click Activities and select an Activity to customize.
2. Click Customize this Activity. The Customize: Activity Sequence page displays. In this example, the
Watch TV Activity is shown.
3. Add steps or delays to your Activity as desired.
Customizing buttons to perform a sequence of commands with MyHarmony
A button sequence is a set of commands that can be grouped together and assigned to one button on your remote,
helping to automate certain tasks. Button sequences are sometimes referred to as macros.
NOTE: There is no equivalent section in this guide for the Harmony App. Use MyHarmony to set up a
button sequence.
To create a button sequence in your MyHarmony account:
1. Click the Buttons tab on the left hand side of the screen.
2. Select an Activity or device from the pull-down menu for the area of the remote you would like to create
a sequence for—screen or buttons, and click Go.
3. Click the Sequences tab on the right side of the screen