LONCIN G250F - 4.9 Recoil Starter Service

Section 4 Disassembly and service
4.9 Recoil starter
a、Disassembly/Reassembly
WARNING
Wear gloves and eye protectors.
Don’t let the spring out when disassembling.
Bolt: M6×8,
Torque: (8~12)N•m
4-13
Recoil starter
Reassembly:
Remove dirt and debris
before installation.
The installation direction can
be changed by changing the
relative positions of the holes
in recoil starter case.
Cover comp.,fan
Bolt, Support Double
Bolt: M6×12
Torque: (8~12)N•m
4-12
CLIP