3-4 Maintenance of silencer
During the long-
term use of silencer, it may cause
carbon deposition and bring about severe influence
to the exhaust system. To make the exhaust system
work better, generally, we will
deposition of the silencer.
When removing
the internal carbon deposition
the silencer, use a hammer to slightly tap it and blow
it with the compressed air.
Please refer to the “Maintenance Schedule” for the
cleaning of spark canceller.
canceller after the e
lectric generator is cooled
Sweep away the carbon deposition accumulated on the mesh
with wire brush. Re-
install the spark canceller and fasten screws.
Don’t clean it with iron wire, or it may cause abscission
of acoustic material and so reduce the sound deadening
performance.
Sealing gasket of the silencer must not be used repeatedly.
Replace a new one if the silencer is accumulated with water
drops or severe erosion and cause increased noise.
The silencer
would become hot and please place the gasoline
engine in a place that the passersby and children cannot
When the gasoline engine is working, don’t place any
inflammables close to the air vent.
- 19 -
term use of silencer, it may cause
carbon deposition and bring about severe influence
to the exhaust system. To make the exhaust system
the carbon
the internal carbon deposition
inside
the silencer, use a hammer to slightly tap it and blow
Please refer to the “Maintenance Schedule” for the
lectric generator is cooled
down.
Sweep away the carbon deposition accumulated on the mesh
install the spark canceller and fasten screws.
Don’t clean it with iron wire, or it may cause abscission
of acoustic material and so reduce the sound deadening
Sealing gasket of the silencer must not be used repeatedly.
Replace a new one if the silencer is accumulated with water
drops or severe erosion and cause increased noise.
would become hot and please place the gasoline
engine in a place that the passersby and children cannot
reach.
When the gasoline engine is working, don’t place any