Chapter IV Disassembly & Repair
- 38 -
b. Disassembly/assembly
The gasoline is flammable and explosive. The fuel valve must be closed before repairing carburetor
and drain fuel in the carburetor. And no open flames.
Assembly:
Check whether the float
moves freely after
assembly.
Assembly:
Blow in compressed air and
remove dirt in the passage
before installation.
Assembly:
Blow in some compressed
air to remove the dirt in
internal passage then
conduct assembly.
Check the wear of the end
and action of spring before
installation.
Assembly:
Check whether it is
assembled in slot.
Oil drain plug of oil cup
Assembly:
Confirm if there is fuel leakage
after installation.
Assembly:
Confirm if there is fuel leakage
after installation.
Assembly:
Remove the dirt in internal
passage completely with
compressed air before
assembly.