Safety Precautions
1) The temperature of the nozzle parts can reach 250 °C during the
operation of the machine. To ensure your safety, it is forbidden to touch
the model and nozzle directly with your hand while the printer is
printing or cooling.
2) During the operation of the machine, it is forbidden to reach into the
machine to prevent pinching.
3) The working voltage is 110~220V AC voltage 50HZ/60HZ AC. The
three-pin socket should be grounded. Do not use other power sources to
avoid damage to components or fire, electric shock and other accidents.
Note: Before powering on, please check whether the input voltage value
of the switching power supply meets the voltage standard of the country
or region.
4) When the machine is working continuously for ≥ 96 hours, it should
be stopped for 1-3 hours.
Consumables
The consumables are not used after unpacking or for a long period of
time after the print model is completed. The consumables should be
taken out of the printer and sealed to prevent the consumables from
being exposed to the air for a long time, causing moisture and affecting
the print quality. At the same time, when the consumables are removed
To Next Page
Loading...
