CHAPTER III MACHINE OPERATION
38
3.2.3 SEAT ADJUSTMENT INSTRUCTIONS
Figure13 ADJUSTMENT TO SEAT
1. Suitable weight adjustment: according to his weight, the user can turn the weight adjustment
knob, turning the knob clockwise to increase the suitable weight, and turning knob counterclockwise to
decrease the suitable weight. Turn the handle to reach the most suitable weight .
Note: Both front-and-rear adjustment and backrest angle adjustment should move the handle in
place. Make sure that the machenism is completely out of control, and then perform the
adjustment. After ending the performance, moves the handle back to the position to ensure that
all parts are locked and reliable.
3.2.4 USE OF THE SAFETY BELT
1. The machine is configurated with safety belt.The driver should tie the belt when operating the
machine. Before using the safety belt, the operator should inspect the wear and fastness of the
safety.replace it if necessary.
2. The operator should adjust the length of the safety belt before using the safety belt.ensure the
protective function and comfort of the safety belt.
Front -rear adjusting handle
To Next Page
Loading...
