110
Appendix C: Connecting Additional External Monitors
5 Under View Setup, select Enable. This lets you select and arrange the channels you want to
show on the screen.
NOTE: Enabling Vie
w Setup disables your ability to change channels the normal way on the
selected monitor. You will need to disable View Setup to return to normal operation.
6 Under Vi
ew Mode, select the desired viewing mode: Single, Quad, Nine, or Sixteen.
7 Cl
ick Vout Setup. A menu appears that allows you to select the arrangement of channels.
8 Click t
he drop-down menus to select which channels to show on the screen and the
arrangement of channels.
9 Cl
ick Apply to save changes. Click Ok. Right-click repeatedly to and return to live viewing.
10 Pr
ess 0 on the remote control 3 times to restore the system interface to the VGA/HDMI
monitor.
Select display mode
Click Vout Setup
Select the arrangement of channels on screen
To Next Page
Loading...
