111
Appendix D: Recording Audio
Appendix D: Recording Audio
The system can also record audio for up to 4 channels (16-channel models) or 8 channels
(8-channel model). You must have audio-capable cameras (not included) or self-powered
microphones (not included) in order to record audio on the system.
To enable audio recording:
1 Co
nnect the BNC video cable from the camera to one of the BNC Video INPUT ports on the
rear panel of the DVR between 1 and 4 (16-channel models) or any Video Input port
(8-channel). For example, connect the camera to Video INPUT port 1.
2 Co
nnect the RCA audio cable from the camera to the corresponding Audio INPUT. Following
the example in step 1, you would connect the cable to Audio INPUT port 1.
3 Right-click
to open the Menu Bar and click the Main Menu button ( ).
4 Cl
ick Record and select the MainStream tab.
5 Ens
ure the Audio checkbox is checked next to the channel the audio-enabled camera is
connected to.
6 Cl
ick Apply to save your changes.
Connect an RCA audio cable from the camera
into the corresponding Audio INPUT port
8-channel model shown
Check Audio to enable audio
recording on each channel
To Next Page
Loading...
