123
Appendix F: DDNS Setup (Advanced)
Step 1 of 4: Port Forwarding
You must port forward the HTTP and Client ports (default: 80 and 9000) on your router to
your DVR’s IP address before you can remotely connect to your system. There are several
methods to port forward your router:
• Use the Lor
ex Easy Connect Auto Port Forwarding Wizard (PC only) to port forward the
required ports (see www.lorextechnology.com for details). For instructions on how to use
the Easy Connect Wizard, see the Easy Connect manual on www.lorextechnology.com.
• Manually port forward the required ports on your router to your DVR’s IP address by
f
ollowing your router manufacturer’s instructions. For more information on port
forwarding, see the reference guides on www.lorextechnology.com.
NOTE: If the abo
ve ports are not forwarded on your router, you will not be able to access your
system remotely.
Step 2 of 4: Create a DDNS Account
Lorex offers a free DDNS service for use with your system. A DDNS account allows you to
set up a web site address that points back to your local network. This allows you to connect
to your system remotely. You must create a DDNS account in the same network as your
DVR.
To setup your free Lorex DDNS account:
1 I
n your browser, go to http://www.lorexddns.net and click Step 1.
To Next Page
Loading...
Need help?
General
