74
Using the PC/Mac Client Software
• SSL: Select ON/OFF to enable/disable Secure Socket Layer protocol.
• SMTP P
ort: Enter your SMTP address.
• SMTP Serv
er: Enter your SMTP Server.
• Sender Email: Ent
er the sender email address. This can be any address of your choice.
• Sender P
assword: Enter your email server’s password.
• Rec
eiver Email: Enter the recipient’s email address.
• Interv
al: Enter the interval the DVR waits before sending a new email notification.
2 Cl
ick Save to save your settings.
Configuring DDNS Settings
Lorex DDNS is available as an optional connectivity option. Please see “Appendix F: DDNS
Setup (Advanced)” on page 119 for details.
The primary connectivity option uses the Lorex Stratus service to connect to your system
over
the Internet without requiring port forwarding or DDNS registration For details, See
“Connecting to Your DVR Over the Internet on PC or Mac” on page 57.
To configure DDNS settings:
1 Visit http://www
.lorexddns.net and register for a free Lorex DDNS account.
2 Click the Remote Setting tab, and click DDNS.
3 Co
nfigure the following:
• DD
NS: Select Enable or Disable.
• In the Se
rver drop-down menu, select LOREXDDNS.
• Do
main Name: Enter your Domain name/URL Request from the confirmation email that was
sent after you created your DDNS account.
• User
name: Enter your DDNS User Name that was emailed to you after DDNS registration.
• Pa
ssword: Enter your DDNS Device password that was emailed to you after DDNS registration.
4 Cl
ick Save to apply your settings.
To Next Page
Loading...
Need help?
General