Controlling the PTZ camera with LNK Series NVRs
7
6. Click + to move to the next preset number in the No. field. Repeat for as
many preset points as you wish to add.
NOTE
• Each preset viewing area you add to the system must have a unique ID number
(No.). Using the same ID number as an existing preset will result in the old preset
being overwritten.
• To cycle through preset viewing points automatically, click
to start PTZ
Cruise. Ensure you have enabled cruise on the selected PTZ camera (see 7.1
Controlling the PTZ camera, page 23 for details).
• Click
to delete a preset.
#LX400075; r.41474/41994; en-US
26
To Next Page
Loading...
Need help?
General
