Page 24
Lotus Service Notes Section MR
Front Relay Blocks
Mounted on the front fusebox panel, is a block of relays, the layout of which is inverted for opposite drive
hands:
RHD LHD
Integrated Control Module
Also mounted on the front fusebox panel is the integrated control module (ICM) which is used to perform
switching and control functions for many of the circuits. The module uses 4 harness connector blocks designated
A,B,C,D, with all connection details identified on the relevant circuit diagram, and summarised below:
13 1 8 1 6 1 11 1
A B C D
26 14 16 9 12 7 22 12 m268
To Next Page
Loading...
