Page 8
Lotus Service Notes Section VE
VE.14 - REAR WINDOW SURROUND
The rear window surround is secured by four spring clips. Pull the panel forwards to remove.
VE.15 - ROOF LINING
The roof lining is retained by the sun visor brackets, the 'B' post upper trims, and two screws at the rear
edge. To remove the roof lining panel:
- Pull the rear window surround from its 4 spring clips and remove the two screws at the rear edge of the
roof lining.
- Release the seat belt upper anchorage from the 'B' pillar, and remove the 'B' post upper trim.
- Prise out the 'fir tree' button from the base of each windscreen pillar trim, and pull each trim panel from its
three spring clips.
- Remove the three screws securing each of the sun visors and visor clips to the roof.
To Next Page
Loading...
