Need help?Do you have a question about the LRS SCINTREX AUTOGRAV CG-6 and is the answer not in the manual?
Provides an overview of the manual and describes the instrument's components.
Indicates important topics, information of interest, and safety warnings.
Instructions for safely removing the CG-6 Autogravâ„¢ from its transportation case.
Illustrates the physical location of the gravity sensor on the instrument.
Details all components supplied with the CG-6 Autogravâ„¢ in its transportation case.
Instructions for connecting the battery holder assembly to the smart batteries.
Details the front panel layout, display, and keypad functions of the CG-6 Autogravâ„¢.
Steps and waiting periods required for the initial startup of the instrument.
Instructions for powering on the CG-6 Autogravâ„¢.
Procedure for charging the CG-6 Autogravâ„¢ batteries using the smart charger.
Overview of setting up the instrument, with or without a tablet computer.
Instructions for configuring the CG-6 Autogravâ„¢ using its basic menu without a tablet.
Procedure to conserve power by disabling the display and leveling arrows.
Accessing and modifying system parameters like backlight and sound.
Manually setting the instrument's internal system time.
Configuring survey-specific parameters like name, operator, and cycles.
Accessing and displaying current calibration and instrument settings.
Adjusting the primary gravity calibration constant.
Setting a reference value to be subtracted from readings.
Adjusting the parameter for temperature-induced gravity changes.
Adjusting the sensitivity scale for the X-axis tilt sensor.
Setting the zero-point offset for the Y-axis tilt sensor.
Setting the rate at which gravity readings are expected to drift over time.
Enabling or disabling temperature, drift, tide, and tilt corrections.
Procedure to measure and update the instrument's drift rate.
Adjusting the scale and offset for the tilt sensors.
Displays serial number, firmware version, memory usage, and sensor temperature.
Defines and names a location for taking gravity measurements.
Procedure to input an alphanumeric name for a gravity station.
Loading previously defined station names for a survey.
Establishing a connection with the instrument's integrated GPS receiver.
Instructions for mounting the instrument on a tripod.
Initiating the gravity data acquisition process.
Steps to ensure the instrument is level using on-screen indicators.
Accessing previously recorded gravity data files.
Transferring collected data files from the instrument to a computer.
Explanation of the .DAT file format and content.
Explanation of the raw .tsf file format and content.
Format and location of drift and tilt calibration files.
Lists common problems and their potential solutions for the CG-6 Autogravâ„¢.
Detailed specifications of the CG-6 Autogravâ„¢ sensor and system.
Catalog of standard and optional parts included with the CG-6 Autogravâ„¢.
Information regarding product warranty and the repair process.
Guidelines for shipping, describing problems, and obtaining instrument repair.
General| Brand | LRS |
|---|---|
| Model | SCINTREX AUTOGRAV CG-6 |
| Category | Measuring Instruments |
| Language | English |
To Next Page