LS ELECTRIC XGT Series - Chapter 4 System Configuration; System Configuration of Network; XGL-RMEA;B + Smart I;O

Chapter 4 System Configuration
4-1
Chapter 4 System Configuration
4.1 System Configuration of Network
The communication system between Rnet I / F modules can be configured as follows
In order to connect to LS inverter, Rnet I / F option module must be installed in
LS inverter to enable communication.
4.1.1 XGL-RMEA/B + Smart I/O
4.1.2 Mixed configuration 1 between XGL-RMEA/B + repeater + Rnet slave